Cutting
Cutting Quality Checkpoints in Garments Industry
Cutting quality plays
an important role to make the best quality garments. The cutting section makes the raw
shape of garments. If the quality of the cutting section is poor, the defects and
rejects of the sewing section will high. In this article, I will discuss the
quality checkpoints of the cutting section to ensure and supply the best quality cut
panel to the sewing section.
![]() |
Figure: Cutting Quality Checkpoints in Garments Industry |
Cutting Quality Check Points
Quality checkpoints of cutting section may divide by 5 category-
1. Fabric Quality Inspection
2. Marker Quality Inspection
3. Spreading Quality Inspection
4. Cutting quality Control
5. Cut Panel Quality Inspection
1. Fabric Quality Inspection
After receiving fabric from the store by
cutting section, cutting quality inspector check the following fabric
information. If all information is correct, then proceed to the next step. The
information are-
✔ Roll to roll fabric shade group check
✔ Fabric GSM and diameter check
2. Marker Quality Inspection
If all information about fabric is correct,
the marker quality inspection is run. Marker inspection may run a parallel way
for saving time. Generally, the subjects of marker quality inspection checking
points are-
✔ Marker
length and width
✔ Marker
efficiency and consumption
✔ Marker
type
✔
Lay quantity
✔ Marker
ratio
✔ All
individual parts of garments are marked in marker
3. Spreading Quality Inspection
If all information of the marker is
correct, the spreading quality inspection is started. The subjects of spreading
quality inspection checking points are-
✔
Checking the number of lay as it should not exceed the standards.
✔ Lay
ends check
✔ Lay
tension check
✔ Lay
height check
✔ Lay
length check
✔ Check
as the marker is best fitted to lay
4. Cutting quality Control
After spreading activity cutting is
started if there is no relaxation issue. If fabric needs to relax, cutting
activity is started after relaxing the fabric. The main checking points during
cutting is-
✔
Checking cut panel accuracy with pattern
✔ Rightly
cutting of lay edge checking.
✔
Checking size mixing
5. Cut Panel Quality Inspection
After cutting the lay, need to check
the cut panel before final bundling and sending to cutting rack. The most
important quality checkpoints for the cut panel are-
✔ Pattern
check
✔ Shade
check
✔ Size
wise ratio check
✔ Fabric
check (Spot, Hole, Knot, Slab, Contamination, Lycra out etc.)
✔ If
fabric is stripe, checking the strip mismatch
✔ Bundle
check
Post a Comment
7 Comments
What a thrilling post, you have pointed out some excellent points, I as well believe this is a superb website. I have planned to visit it again and again. check this link
ReplyDeleteThis is just the information I am finding everywhere. Thanks for your blog, I just subscribe your blog. This is a nice blog.. read here
ReplyDeleteThis is such a great resource that you are providing and you give it away for free. I love seeing blog that understand the value of providing a quality resource for free. brandable company names
ReplyDeleteThis is the most wonderful blog post I have seen from you. I have never seen a more wonderful blog post than this one. Learning how to Spacebar click on any keyboard takes patience, lots of it. It’s not something that you can master within a few hours. for more information about Spacebar clicker visit the article.
ReplyDeleteHello, thank you for providing guidance in making a checklist in determining quality control when cutting fabric. But if possible I would like you to explain in more detail each of the list.
ReplyDeleteV good effort
ReplyDeletegood information
ReplyDelete